Table of Contents
Advertisement
4
Load and align the edge of the tab paper
against the right edge of the tray with the
side to be copied or printed on facing down.
Important • Do not load paper exceeding the
Note
5
Move the two paper guide levers while
holding their grips so that they lightly contact
the edges of the paper.
6
Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it
Loading Paper in Tray 5 (Bypass)
When printing or copying with paper sizes or types that cannot be set in Trays 1 to 4,
6, and 7, use Tray 5 (Bypass).
The following describes how to load paper into Tray 5 (Bypass).
To make detailed instructions for printings, specify the instructions using the [Tray/
Output] tab in the print driver. When doing this, also specify the type of paper to load.
Note
1
Open Tray 5 (Bypass) as necessary.
Note
maximum fill line. It might cause paper
jams or machine malfunctions.
• Do not place any paper or objects in the
empty space on the right side of the tray.
It may cause paper jams or machine
malfunctions.
• When copying or printing on multiple set of tab paper of a set with which tab positions differ,
load each tab paper with the side to be copied or printed on facing down to set the first paper
coming on top.
might cause machine malfunctions.
• When adding paper to Tray 5 (Bypass), remove any paper remaining in the tray, and then
load the removed paper with the new stack of paper.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
• If necessary, extend the extension flap.
The extension flap can be extended in
two stages. When pulling out the
extension flap, do it gently.
Loading Paper
M A X
4
69
Advertisement
Table of Contents
