Table of Contents
Advertisement
6 Problem Solving
5
Make sure that all four corners are neatly aligned.
6
Insert the paper into the tray with the printing
side facing up until its leading edge lightly
comes up against the paper feed entrance.
Note
Paper Jams in Tray 5 (Bypass) with High Capacity Feeder C2-DS
(Optional)
The following describes clearing paper jams from Tray 5 (Bypass) when High Capacity
Feeder C2-DS (optional) is installed.
1
Remove any paper placed or jammed in
Tray 5 (Bypass).
Important • When two or more sheets of paper are
Note
6
2
If the paper cannot be removed in step 1,
clear the paper jam by opening the front
cover of the High Capacity Tray Unit.
For information about clearing paper jams from the
High Capacity Tray Unit, refer to "Paper Jams in
Trays 6 and 7 (High Capacity Feeder C2-DS
(Optional))" (P.124).
3
If the paper cannot be removed in steps 1
and 2, open the top cover of Tray 5 (Bypass)
and remove the jammed paper and any
paper loaded.
4
Close the top cover of Tray 5 (Bypass).
5
Make sure that all four corners are neatly aligned.
116
• Do not load paper exceeding the
maximum fill line. It might cause paper
jams or machine malfunctions.
loaded, remove all the sheets from the
tray.
• If paper is torn, check for any torn pieces
of paper in the tray.
Advertisement
Table of Contents
