Delete Outside/Delete Inside (Deleting Outside Or Inside Of The Selected Area) - Fuji Xerox DocuPrint CM415 AP User Manual

Note
 Last Original
Select this button to end scanning documents.
 Next Original
Select this button when you have more documents to copy. This button is always selected
when the Combine Original Sets feature is used.
 Start
After loading the next document, select this button to scan the next document.
Note
Delete Outside/Delete Inside
(Deleting Outside or Inside of the Selected Area)
This feature allows you specify the areas to be deleted from a document image. Up to three
areas can be specified.
Important • When you use this feature, please be sure to set the original size. For more information, refer to
1
Select [Delete Outside/Delete Inside].
2
Select any option.
 Off
No area is deleted.
 Delete Outside
Deletes the outside of the selected area.
 Delete Inside
Deletes the inside of the selected area.
 Area Settings
Displays the [Delete Outside/Delete Inside - Area 1 (Area 2 or Area 3)] screen. You can
specify up to three areas.
Refer to "[Delete Outside/Delete Inside - Area 1 (Area 2 or Area 3)] Screen" (P.148).
 Originals
When the original document is a 2-sided document, specify from which side the specified
area is to be deleted.
 Both Sides
Applies the settings to both sides of the document.
• You can also press the <C (Clear)> or <Clear All> button on the control panel to perform the same
operation.
• You can also press the <Start> button on the control panel to perform the same operation.
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
Job Assembly
3
147