Security Codes; Keypad Panic Keys; Zone Monitor Feature; Optional Keyswitch - ADEMCO Vista-20 Installation Instructions Manual

—
One installer codefor entire system(user 1)
One Master codefor eachpartition (user 2)
12 secondaryuser codesfor eachpartition (users 3-14)
One baby-sittercodefor eachpartition (user 15)
One duresscodefor eachpartition (user 16)
Keypad panic Keys
"
Up to 3 programmablepanickey functions are provided.
Designated as Zones95,96,99
Activated by wired & wirelesskeypads
" Reported separately by partition, distinguished by subscriber ID
number
Zone Monitor Feature
The control will sense a high resistance in the loops on hard-wired
zones 2-8 if it is present, and will display a irouble message (rather
than an alarm) for the afYected z one when the systemis in the disarmed
mode. This feature also prevents the system from being armed while
this high resistanceconditionezists.
Exit
Error False AlaIWBPrevention Feature
Enables the system to determine the difference between a regular
alarm and an alarm causedby leaving an Entry/Exit or Interior zone
open after the exit delay expires. If not disarmed in time, an alarm will
sound and an "Exit Error" report sent to the central station.
An Exit Alarm conditionwill also occurif an Entry/Exit or Interior zone
re-openswithin 2 minutes afterthe end of an exit delay.
Optional output Relays and Powerline Carrier Dewicee (X-1O type)
Up to 4 relays using one 4204 Relay Module
" Up to 2 relays using one 4229 Zone/Relay Module
Up to 8 Powerline Carrier devices(you must subtract the number of
relay outputs actuallyused by the 4204 or 4229 modules, if used)
optioriel Keyewitch
Supports the Ademco4146 keyswitch on basic hardwire zone 7. May
be assignedto either partition.
Optional Voice Module
"
Supports the Ademco4265 Voice Module on Partition 1 only.
-10-