Long Range Radio; Connection; Long Range Radio Connections - ADEMCO Vista-20 Installation Instructions Manual

General
Information
Ckeck availability of ModeZs 7720 PLUS or 7820 long range radios.
If output to long range radio is selected, a lI messagesthat are programmed to
go to the primary telephone line receiverwill also be sent to the 7720 PLUS
or 7820 long range radio. These messages will be in Contact ID format (not
affectedby entry in field *48).
The data line is supervised, as well as certain functions in the radio. If
communication is lost or a trouble develops,a messagewill be attempted to
be sent via both radio and telephoneto the central station.
For completeinformation, seethe manual that accompanies the radio.
L
2.
3.
4.
5.
6.
Connect the data in/data out terminals and voltage input terminals of the
No. 7720 PLUS or 7820 Long Range Radio to the control'skeypad connection
points, terminals
4, 5,6,
and-7 as *own below.
BIACK
m
RED
I
3 '" "--'" 1
LO"NG RANGE RADI
v GRFFN !
c
7720 PLUWS20
,0
6=-4
CONTROL
1 1
TERMINALS
Pigure
18. Long Range Radio ComMxtl "Om
With at least one 2-line Alpha keypad (5137AD or 6139) connectedto the
Partition 1 keypad terminals on the control, power up the system
temporarily. If you had previously connectedthe AC transformer to the
control panel, you need only plug in the transformer (to 120VAC outlet) to
power up the system.
Enter the programming mode by keying the following on the Alpha
keypad Installer code (41 12) + 80 0.
Press *29 OUTPUT TO LONG RANGE RADIO
Enter the first digit of the trouble dialer report. The 2nd digit of the code
entered infield *O is automaticallysent as the seconddigit of this code.
Program the 7720 PLUS or 7820radio for deviceaddress3.
Exit the programming mode by keying=.