ADEMCO Vista-20 Installation Instructions Manual page 95

Device number 2 must either be programmed to be STOPPED in
field *8O or STOPPED by entry of security code + # + 8 + 2.
Partition in *O should be setto "O"for STOP.
*93 ~ER OF ~POR~ ~ ~
PEIUOD
This option can be used to limit the number of messages (alarm& alarm
restore reports) sent to the central station in an armed period. "O"
limits reports to a total of 10; "1" allows an unlimited number of
reports. Default is O.
For UL hstallation~ enter "Im).
DOWNLOAD - DOWNLOAD PHONE NUMBER
INFORMATION
Enter up to 12 digits; 11111111111
($k94, * 5)
I
O-9, # +11 for "*", # + 12 for "W, # + 13 for a pause. Do not fill unused
spaks. End field by entering *. To clear entries from field, press *94*.
*95 RING DETECTION COUNT FOR DOWNLOADING
l-l
Enter number of ringa beforecontrol picksup phone line (or O or 15).
Refer to the chart belowand program this field accordingly.
Toice Auswering
[odule Machine Downloading Field -5
Yes No No Set for valueotherthan "O"(1–15). This
will enablethe controlpanelto answer
the phonecell. Otherwise, i t will notbe
possibleto
access the VoiceModule
Yes Yes No Set for a value higher than the number of
of rings for which the answeringmachine
is set. Example: if machineis setfor 4
rings, use a value of 5 or higher. This is
recommendedsothat the VoiceModule
can still be accessed if the answering
machine is turned off and doesnot
answer the phone call.
Yes No Yes Set for value other than "O"(1–15).
Yes
Yes Yes Enter "15" to bypass answeringmachine.
No No
No
Enter "O".
No
Yes No Enter "O".
No
No Yes Enter 1–15.
I
No
I
Yes
I
Yes I Enter 15.
TO
EXIT
PROGRAMMING MODE
(*8 or -9)
~ DOWNLOAD ID AND SUBSCRIBER ACCT. No.
FOR DOWNLOADING
(No data entryrequired,press -)
SET ALL PROGRAM FIELDS TO DEFAULT VALUES
(No data entryrequired,pressingW7 automatically loadsall
defaults).
EXITS PROGRAMMING G MODE and prevents
re-entry by:
lnstaRer Code+ 8+O+0
- PROGRAMMING G MODE and uZlows re-entry by
Installer Code + 8 + O + O or by Power-up then "*" and "#".
-95-