ADEMCO Vista-20 Installation Instructions Manual page 68

SummuryModeDisplay
DefaultDescrkk.or ~
II X ZN 01 ZONE 01 II
Flashing
Cursor(system is
readyforentryofword).
3
II
Functions:
'
'1 II II
[s1
[11
[61
[81
Scrolls both alphabet
and actual words in
ascending
alphabetical
order.
Scrolls both alphabet
and actual words in
descending
alphabetical
order.
Selectsbetweenalpha-
bet and actualwordlisti
alsousedto save
words.
Storesthe zonedescrip-
tionin memory.
I
II
X ZN 01 BACK
A
I
.
Flashing Cursorif%" is
pressed (system is ready
fornextword).
X ZN 01 BACK
D 00R
t
Flashing
Cursor
4,
*
5.
6.
7.
8.
Press "O" (No).* The system will
then automatically display the
descriptorfor zone 1.
Theprocedure for addingcustom wordsto
thebuilt-in vocabulary will be foundlater
under"AddingCustom Words".
If a descriptor was not entered
previously for zone 1, the default
descriptor for zone 1 will be dis-
played.
Note that this a "summary mode",
and that no entries can be. made.
Entries can be made only when the
display contains a flashing cursor,
which signifiesthe "entry mode".
To delete or change the default
descriptor for zone 1,
press * plus
the same zone number (01).
This
will clear that descriptor and gain
access to the entry mode with
flashing cursor, allowing changes to
be made.
NOTE: If you do not wish to change
the existing descriptor for zone 1,
enter * plus the next zone number for
which you wish to enter (or check) a
descriptor. A summary display for
that zone will appear. You must then
press * plus the same zone number
again to gain access to the entry mode
(flashing cursor) for that zone.
Fress # plus 3-digit number
for the
first word from the "Alpha
Vocabulary List". Example: The
descriptor that we wish to enter for
zone 1 is BACK DOOR. From the list,
BACK = 013. Therefore, you would
enter # O 1 3.
Note: If you accidentally enter the
wrong word, simply press # plus the
correct 3-digit number for the word
you want.
Press '6m to accept the selected
word and continue.
Note:
If this is the only word you are
using for the descriptor, press "8"
instead of "6" to save that word in
memory, and then go to step 11.
Enter the 3-digit number for the
next word. In our
example,the word
is DOOR, whosenumber is "057".
Enter # O 57. This display will
appe=