Primary Subscriber Account; Secondary Subs Accound; Phone System Select; Report Format - ADEMCO Vista-20 Installation Instructions Manual

For Fields %3, M, M, and W6.
Entries provided for up to 4 digits for primary office and 4 digits for
secondary.
Enter digits O-9; # +ll=B; # +12=C; # +13=D; # +14=E; or # +15=F.
Enter *as the fourth digit if a 3-digit accountnumber (for 3+1 dialer
reporting format) is used. Enter O as the first digit of a 4-digit account
number for Nos. 0000-0999. Exit field by pressing* (and press next
field number) if only 3 digits are used.
To clearentries fi-om field, press *3*, W-@, *45* or *46*.
See blank Programming Form for examplesof Account No. entries.
PRJMARY SURSCRJBER ACCOUNT. No.
(partition 1)
"3 ~ *~Receiver
Seenotesabove.
SECONDARY SUBS ACCOUNT. No.
(partition 1)
~ SecondaryReceiver
Seenotesabove.
PRIMARY SUBSCRIBER ACCOUNT. No.
(partition 2)
= ~ --Receiver
Seenotesabove.
SECONDARY SUBS ACCOUNT. No. (pSrt.
2)
w ~ second=yR@=i=
See notesabove.
%7
PHONE SYSTEM SELECT
Enter 1 digit. Default is O.
If Central Station Receiveris not on WATS line
O= Pulse Dial 1 = Tone Dial
If Central Station Receiveris on WATS line:
2 = Pulse Dial 3 = Tone Dial
W8 REPORT FORMAT PIimary
Second=
Determine which format is to be used to report to the central station.
Enter 1 digit (O-9).
O = 3+1; 4+1 ADEMCO Lo Speed Standard (this is the det%ult)
1 = 3+1; 4+1 RdiOniCS Standard
2 = 4+2 ADEMCO Lo SpeedStandard
3 = 4+2 RdiOY.liCS Standard
6 = 4+2 ADEMCO Express
7 = ADEMCO Contact ID Reporting
8 = 3+1; 4+1 ADEMCO Lo SpeedExpanded
9 = 3+1; 4+1 ~diOniCS Expanded
(Enter *as the 4th digit of-3 through *46, if 3+1 dialer reporting is
to be used.)
For an explanation of these formats, see
Section 17. SYSTEM
COMMUNICATION .
Note:
The maximum number of alarm and alarm restorereports
during one armed period is determined by field *93.