Testing the Sounder
After installation of the sounder is completed, each partition of the Security
System should be carefhlly teste~ as follows.
1.
2.
3.
4.
5.
Connect the battery wires from the contiol board to the battery, observing
correctpolti&.
Enter the installer code (4112) and press the TEST [5] key on the keypad.
The external sounder should sound for 1 second if the sounder is good and
proper connections have been made. Note that if the backup battery is
discharged,the sounder will not tum on.
To turnoff the test mode, enter the installer code (4112) and pressthe OFF
key.
Disconnectthe battery wires tiom the battery terminals.
Unplug the AC transformer born the AC outlet.
-57-