ADEMCO Vista-20 Installation Instructions Manual page 93

*7
*W
REsToRE
*7O
REPORT CODES
(*70+76)
*7I
*72
*73
*74
*75
*76
*8O
AC LOSS REPORT CODE ril
I
I
See box on previous page. Reports with Partition 1 Subscriber No.
_ of this report is random with up to a 4-hour delay. If AC
restoresbeforethe report goesout, there is no AC restore report.
LOW BAT REPORT CODE
m
See
box. Reportswith Partition 1 SubscriberNo.
TEST REPORT CODE
D
Seebox.
PeriodicReportswith Partition 1 Subscriber No.
OPEN REPORT CODE
See box.
2nd digit = User #, if expandedor 4+2 reporting is selected.
ARM AWAY/STAY REPORT CODE r-i-l
This option allowsfor independent programming of AWAY and STAY
reports for eachpartition. 2nd digit of report is User No. if expanded
or 4+2 reporting is selected.
RF XMTRn
LOW BATTERY REPORT CODE
(See box)
D
CANCEL REPORT CODE (See
box on previous page.)
D
AMRM RESTORE REPORT CODE, 1st DIGIT
2nd digit is automatically sent as the 2nd digit of the zone alarm
report codeprogrammedin field *56, if expanded or 4+2 reporting is
selti
TROUBLE RESTORE REPORT CODE
D
See box.This is sentwhena troublein a zoneis restored.
BYPASS RESTORE REPORT CODE
m
See box.
This is sent when a zone that has been bypassed is un-
bypszsed.
AC RESTORE REPORT CODE
D
Seebox. Reportswith Partition 1 SubscriberNo.
LOW BAT RESTORE REPORT CODE
m
Seeboxon previouspage. Reports with Partition 1 Subscriber No.
RF XMTR. LOW BATTERY RESTORE CODE
D
Seebox. This is sentwhen a transnu utterthat previously sent in a low
battery messagehas sent a messageindicating it no longer has a low
battery condition.
TEST RESTORE REPORT CODE
D
Seebox. Reportswith Partition 1 SubscriberNo. A restore codeentered
here will causea restoremessageto be sentwhen Test mode is exited.
OUTPUT DEVICES
This is an interactivemenu mode that is applicableonly if field *25 is
programmedfor a 4229 or 4204, or if Powerline Carrier devicesare to
be used. See
Section 8. RELAY OUTPUTS& POWERLINE CARIUER
DEVICES
for a detailed programming procedure. Also refer to the
OUTPUT DEVICE table for *8O in the Programming Form.
-93-