ADEMCO Vista-20 Installation Instructions Manual page 82

Press *9O EVENT LOGGING
u
O =
None; 1 = Alarm/Alarm Restore;2 = Trouble/Trouble Restore;
4 = Bypass/BypassRestore;8. Open/Close. Default is "3".
l.JxumpZ.e:
T o select"Alarm/Alarm Restore",and "Open/Close",enter 9
(1+ 8); to selectall, enter #15.
Note: System messagesare loggedwhen non-zero selectionsare made.
SeeFields %9 and WO in
Section
19.
DATA FIELD DESCR.LP2YONS
for a more detailed descriptionof Event Logging.
Press *2. PHONE LINE MONITOR ENABLE.
u
O= Not used (default)
1 = Localkeypad display only when phone line is faulted.
2 = Local keypad display plus keypad tiouble sound when line is faulted.
Each partition turns off its own trouble sound. No automatictimeout.
3 = Same as "2" above plus Device No. 2 STARTS. If either partition is
armed, external sounder activates.Extemm.1 sounder will be turned off
by normal bell timeout, or by security code plus OFF
from either
partition
(it doesnot have to be the one that was armed).
Device number 2 must either be programmed to be STOPPED in field
*80 or STOPPED by entry of security
code + # +
8 + 2. Partition in
*8O should be set to "O"for STOP.
Press *93 NUMBER OF REPORTS IN ARMED PERIOD
c1
"O"
limits reports to a total of 10 per code; "1* allows an unlimited
number of al&n plus alarm restore-reports."Defaultis O.
Enter ~1~for UL installations.
Press * DOWNLOAD PHONE NUMBER
11111111111
1 Enter up to 12
digits;
O-9, # +11
for "~, # + 12 for "#n,# + 13 for a pause. Do not fill unused
spaces. End field by entering "*". To clear entries, press*94*.
Press -5 RING DETECTION COUNT FOR DOWNLOADING
u
Refer to the chart below and program this field accordingly.
Voice
Module
Yes
Yes
1=
Yes
Yes
No
No
No
No
Answering
Machine Downloading
No No
Yes
No
I
No
I Yes
Yes
Yes
No
No
Yes No
No Yes
Yes
I
Yes
Field *95 l%o~g
Setfor valueotherthan"O"
(1-15).
This will
enable thecontrol p anelto
answer thephonecall. Otherwise, it
won'tbepossible toaccess t he Module.
Setfor a valuehigherthanthe number
ofringsfor whicli"the a nawe~
machine is set. Example:if machine is
setfor
4 rings, use
value
5
or
higher.
Thisis recommended sothattheVoice
Modulecanstillbeaccessed if the
answeringmachine is turnedoffand
does notanswer the phone call.
Set for valueotherthan'O"(1-15).
"15" to bypass answering machine.
Enter "O"
Enter'O"
Enter 1-15
Enter
15
INITIALIZE DOWNLOAD ID AND SUBSCRIBER ACCT. No.
FOR DOWNLOADING (No
data entry required)
This
completes the communication programming.
Exit the programming modeby keying *99.
Refer to
Section 21. TESTING THE SYSTEM to
checksystemoperation.
-82-