Enabling Encryption Settings - Oki MB492dn User Manual

Enabling Encryption Settings

After creating a certificate, perform the following procedure to enable encryption.
If you enable encryption, communication is encrypted immediately after the settings is changed from the Web page.
1.
Open the Web page of this machine.
About the IP address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [Network] > [Security] > [Protocol ON/OFF].
5.
Select [Enable] for the protocol to which apply the encryption.
6.
Click [Submit].
1162