Trap - Oki C9600dn Configuration Manual

Trap

The default setting is underlined.
Trap-1
Sets community name assigned to outgoing printer status traps
such as off-line, paper out, etc. Up to 77 alphanumeric characters.
Default is public.
AdminManager
[Setup] →
...] → [Printer Trap Community Name]
Web Browser
[Network] → [SNMP Trap] → [Printer Trap Settings] →
Printer Trap Community Name} → [Printer Trap Community Name]
TELNET
[Setup printer trap] → [Prn-Trap community]
Trap-2
Enable/disable sending a trap packet for each destination. Five IP
address destinations and one IPX destination can be set up.
AdminManager
[Setup] →
...] → [TCP #!–5] → [Detail ...] → [Trap Enable]
[Network] → [SNMP Trap] → [STEP3. Set Printer Trap Assignments]
TELNET
[Setup printer trap] → [Setup TCP#1–5 trap] → [TCP#1–5 Trap enable]
[OKI Device Setup] → [SNMP] → [Printer Trap Setup
[OKI Device Setup] → [SNMP] → [Printer Trap Setup
Configuration: Configurable Items • 90
NOTE
{STEP1. Set