Setting Secure Protocol - Oki MB492dn User Manual

Setting Secure Protocol

Authentication using the Kerberos server can be used when accessing the LDAP server. To use Secure Protocol, you must complete
setting the SNTP server and DNS server.
1.
Open the Web page of this machine.
About the IP address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to use log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [Network] > [Secure Protocol Server Setting].
5.
Enter a realm name in [Domain].
6.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
1175