Changing From A Computer; Changing From Configuration Tool - Oki MB492dn User Manual

Changing from a Computer

Changing from the Web Page

Changing from Configuration Tool

Changing from the Web Page
You can change the administrator password of this machine from the Web page. The administrator password specified on the Web page
is used when logging from the Web page or operator panel.
1.
Open the Web page of this machine.
IP Address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [Management] > [New Admin Password].
5.
Enter a new password in [New Password].
Memo
You can enter 6 to 12 alphanumeric characters for the password.
The password is case sensitive.
6.
Re-enter the new password in [New Admin Password (Verify)].
The password is not be displayed. Write down the password and keep it in a safe place.
7.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
Memo
You do not need to restart the machine. The next time you log in as the administrator, you can use the new password.
Changing from Configuration Tool
You can change the administrator password of this machine from Configuration Tool.
Using Configuration Tool (Windows only)
1.
Click [Start], and select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Click the [Device Setting] tab.
4.
Click [Change Password].
5.
Enter the current password in [Current Password].
The factory default password is "aaaaaa".
6.
Enter a new password in [New Password].
7.
Re-enter the new password in [Re-enter New Password].
1087