Encrypting Communication With Ipsec - Oki MB492dn User Manual

Encrypting Communication with IPSec

You can encrypt communication between your computer and the machine.
The communication is encrypted by IPSec. When IPSec is enabled, encryption is applied for all the applications by using IP protocols.
You can specify up to 50 hosts by their IP addresses. When a host that is not registered tries to access the machine, it is rejected. When
you try to access a host that is not registered, the attempt is invalid.
Be sure to configure the machine in advance, before configuring your computer.
Memo
You must have a pre-shared key readied in advance.
Setting This Machine
This section describes the settings you need to set on the printer to enable IPSec. You must log in to the Web page as the
administrator to complete this setting.
Setting a Computer
This section describes the settings you need to set on a computer to enable IPSec. You must set the printer before this setting.
1165