Copying Different Size Documents (Mixed Size); Note For Using Multiple Functions; Functions That Cannot Be Used Simultaneously; Disabling A Function - Oki MB441MFP User Manual

Useful Functions
Copying Different Size
Documents (Mixed Size)
When you use the ADF, you can copy multiple
documents having the same width but different
lengths at the same time onto their respective
paper sizes.
Note
 You can use this function only when the document is a
combination of letter and legal 13.5 or of letter and legal
14.
 When Enabling [Mixed Size], [Paper Feed] is set to
[Auto], a paper tray corresponding to a document is fed
and [Paper Feed] cannot be selected.
 [Mixed Size] is available only when [Zoom] is set to [Fit
to page(98%)] or [100%].
 You cannot set [Edge Erase] and [Mixed Size] at the
same time.
 Enable more than one paper tray by pressing the
<SETTING> key and then selecting [Paper Setup]>
[Select Tray]>[Copy] to use this function.
 When you use the MP tray, load paper in the MP tray first
and then enter the [Mixed Size] menu.
Memo
 You can use only standard paper for this function.
 In this section Tray1 and MP tray are used, and Legal 14 is
loaded in Tray1 and Letter is loaded in MP tray as an
example.
Load Legal 14 in Tray1 and Letter in MP
1
tray.
Press the <SETTING> key.
2
Press the to select [Paper Setup] and
3
then press .
OK
Select [Legal 14] for [Paper Size] of
4
Tray1 and [Letter] for [Paper Size] of
MP tray.
Press until the top screen appears.
5
Press the <COPY> key.
6
Place your documents with mixing Letter
7
and Legal 14 sizes in the ADF.
Press the to enter the [Change
8
settings] menu.
Press the to select [Mixed Size] and
9
then press .
OK
Press the to select [ON] and then
10
press .
OK
Press the until the copy standby
11
screen appears.
Check that the following settings are
12
displayed on the start screen.
[Mixed Size]:
[Paper Feed]:
[Zoom]:
[Scan size]:
ON
Auto
100%
Legal 14
Enter the number of copies.
13
Press
14
M
ONO
Note for Using Multiple
Functions
Functions That Cannot Be Used
Simultaneously
Some functions cannot be used in combination
with other functions. If you try to select
incompatible functions, a message indicating that
you cannot select the function appears.
For example, when you have specified [Margin],
you cannot specify [N-in-1] and [Repeat].
When selecting [Margin]
you cannot specify [N-in-1]/
[Repeat].
Of functions displayed in the message, disable
unnecessary functions and then try to set a
function you want to use again.
Memo
 Some functions cannot be used with others.

Disabling a Function

To disable one of the functions, return the
function's setting to the default.
Press the <COPY> key.
1
Press the
2
settings] menu.
Press the
3
want to disable and then press
Press the
4
and then press
Press the
5
screen appears.
Memo
 When the default setting has been changed from the
factory default, select the default setting after changing
should be selected.
Reference
 For the default value of each function, refer to
Information" P.
- 14 -
.
to enter the [Change
to select the function you
to select the default value
.
OK
until the copy standby
80.
.
OK
"View