Table of Contents
Advertisement
5 Network Settings
To set your printer's network settings, install the Net Configuration Tool on a PC running the Microsoft Windows
OS.
Supported Operating Systems
The following operating systems are supported:
Microsoft Windows 7 (32bit/64bit)
•
Microsoft Windows 8 (32bit/64bit)
•
Microsoft Windows 8.1 (32bit/64bit)
•
Microsoft Windows 10 (32bit/64bit)
•
Microsoft Windows Server 2008 (32bit/64bit)
•
Microsoft Windows Server 2008R2 (64bit)
•
Microsoft Windows Server 2012/2012R2 (64bit)
•
Microsoft Windows Server 2016 (64bit)
•
Microsoft Windows Server 2019 (64bit)
•
Connecting the Printer and Host (PC)
To configure LAN settings, connect the Ethernet cable to the printer while the host (PC) and printer are
connected to the same network. For configuring WLAN settings, the host (PC) and printer should be connected
to the same Wi-Fi Access Point or connected to each
other using Wi-Fi Direct (P2P).
To configure the the printer's wireless network advanced
settings (all configurable WLAN settings), the printer must
be connected through a serial port cable or USB cable.
LAN/WLAN Basic Configuration
The LAN/WLAN tab allows you to search printers
connected to the same LAN/WLAN network and configure
the printer's network settings to enable communication
between the printer and host. You can also configure the
printer's network settings using a web browser.
Classification: Avery Dennison – Public
13
Advertisement
Table of Contents
