Changing The Passwords; Setting The Network Card Access Password - Avery Dennison MONARCH 9493 System Administrator Manual

C h a n g i n g t h e P a s s w o r d s
You can change the network access password, network update password, configure network
1.
security, IP access or protocol, print a test page, or access the console from the Web Admin
Configuration screen.
From the side menu, click Admin. The Web Admin Configuration screen appears.
2.

Setting the Network Card Access Password

When set, the network card access password allows you to view the Web browser and the
remote console. The default is access. The password is case-sensitive and stored in the
printer's flash memory.
Note: Make a note of the password if you change it. Changing the password also restricts
access to Telnet sessions.
From the side menu, click Admin. The Web Admin Configuration screen appears.
1.
2. Click Configure Network Card Access Password.
Enter a new network access password.
3.
4. Retype the new password to confirm it.
5. Click Submit.
Using a Web Browser 4-11