Remove A Dimm - Oracle Netra SPARC T4-1B Service Manual

2. (If needed) Prepare for service.
See
3. Press the Remind button on the motherboard.
While the Remind button is pressed, an LED next to the faulty DIMM illuminates,
enabling you to identify the faulty DIMM. See
Tip – The DIMM Fault LEDs are small and difficult to identify when they are not
illuminated. If you do not see any illuminated LEDs in the area of the DIMM LEDs,
assume that the DIMMs are not faulty.
4. Remove the faulty DIMM.
See
Related Information
"DIMM Configuration" on page 77
■
"Remove a DIMM" on page 80
■

▼ Remove a DIMM

1. (If needed) Prepare for service.
See
2. (If needed) Locate the faulty DIMM.
See
3. Remove the DIMM from the motherboard.
a. Push down on the ejector tabs on each side of the DIMM until the DIMM is
80 Netra SPARC T4-1B Server Module Service Manual • June 2012
"Preparing for Service" on page
"Remove a DIMM" on page
"Preparing for Service" on page
"Locate a Faulty DIMM" on page
released (panel 1).
51.
"DIMM Configuration" on page
80.
51.
79.
77.