Returning The Server Module To Operation; Replace The Cover - Oracle Netra SPARC T4-1B Service Manual

Returning the Server Module to
Operation
These topics describe how to return Oracle's Netra SPARC T4-1B server module to
operation after removing it from the modular system for service.
Step Description
1. Replace the server module cover.
2. Install the server module into the
modular system.
3. Power on the server module host using
Oracle ILOM or the power button.
Related Information
"Preparing for Service" on page 51
■

▼ Replace the Cover

Perform this task after completing installation or servicing of components inside the
server module.
1. Set the cover on the server module (panel 1).
The cover edge hangs over the rear of the server module by about half an inch (1
cm).
Links
"Replace the Cover" on page 117
"Install the Server Module Into the
Modular System" on page 118
"Power On the Host (Oracle ILOM)" on
page 120
"Power On the Host (Power Button)" on
page 120
117