Check For Psh-Detected Faults - Oracle Netra SPARC T4-1B Service Manual

Memory
■
I/O subsystem
■
The PSH console message provides the following information about each detected
fault:
Type
■
Severity
■
Description
■
Automated response
■
Impact
■
Suggested action for a system administrator
■
If PSH detects a faulty component, use the fmadm faulty command to display
information about the fault. Alternatively, you can use the Oracle ILOM command
show faulty for the same purpose.
Related Information
"Check for Faults (show faulty Command)" on page 18
■
"Check for PSH-Detected Faults" on page 42
■
"Clear PSH-Detected Faults" on page 44
■

▼ Check for PSH-Detected Faults

The fmadm faulty command displays the list of faults detected by PSH. You can run
this command either from the host or through the Oracle ILOM fmadm shell.
As an alternative, you can display fault information by running the Oracle ILOM
command show.
42 Netra SPARC T4-1B Server Module Service Manual • June 2012