Oracle Netra SPARC T4-1B Service Manual page 26

3. Open an SSH session to log into Oracle ILOM on the CMM.
The default Oracle ILOM login account is root with a default password of
changeme. The password might be different in your environment.
ssh root@CMM_IP_Address
Password:
Waiting for daemons to initialize...
Daemons ready
Oracle (R) Integrated Lights Out Manager
Version 3.0
Copyright (c) 2011, Oracle and/or its affiliates, Inc. All rights reserved.
Warning: password is set to factory default.
->
The Oracle ILOM prompt (->) indicates that you are accessing the Oracle ILOM
CLI.
4. Navigate to the server module.
-> cd /CH/BLn/SP/cli
Replace n with an integer that identifies the target server module (the slot in
which the server module is installed).
5. Start the server module SP Oracle ILOM CLI.
-> start
Are you sure you want to start /CH/BL0/SP/cli? y
start: Connecting to /CH/BL0/SP/cli using Single Sign On
6. Perform Oracle ILOM commands that provide the diagnostic information you
need.
These commands are commonly used for fault management:
■
■
Note – You can use fmadm faulty in the Oracle ILOM faultmgmt shell as an
alternative to show faulty.
16 Netra SPARC T4-1B Server Module Service Manual • June 2012
show command – Displays information about individual FRUs.
See "Display FRU Information (show Command)" on page
show faulty command – Displays environmental, POST-detected, and
PSH-detected faults.
See "Check for Faults (show faulty Command)" on page
17.
18.