Replacing The Server Module Enclosure Assembly (Motherboard); Transfer Components To Another Enclosure Assembly - Oracle Netra SPARC T4-1B Service Manual

Replacing the Server Module
Enclosure Assembly (Motherboard)
When certain parts and components in the server module, such as the motherboard,
require replacing, you must replace a high-level assembly called the enclosure
assembly. This includes a new server module chassis with the motherboard and many
other components already installed.
If you determine that a faulty component is not one of the replaceable FRUs
described in this document, the enclosure assembly must be replaced.
Note – This procedure must be performed by an Oracle field service representative.
"Transfer Components to Another Enclosure Assembly" on page 113
■
Related Information
"Identifying Components" on page 1
■
"Detecting and Managing Faults" on page 5
■
"Preparing for Service" on page 51
■
▼ Transfer Components to Another
Enclosure Assembly
When you replace an enclosure assembly, you must move a number of FRUs from the
original server module to the same locations in the replacement enclosure assembly.
113