Table of Contents
Advertisement
3. If the virtual keyswitch is set to normal, and you want to define the mode,
level, verbosity, or trigger, set the respective parameters.
Syntax:
set /HOST/diag property=value
See
parameters and values.
For examples:
-> set /HOST/diag mode=normal
or
-> set /HOST/diag verbosity=max
4. To see the current values for settings, use the show command.
For example, showing default values:
-> show /HOST/diag
/HOST/diag
->
Related Information
"POST Overview" on page 29
■
"Oracle ILOM Properties That Affect POST Behavior" on page 30
■
34
Netra SPARC T4-1B Server Module Service Manual • June 2012
"Oracle ILOM Properties That Affect POST Behavior" on page 30
Targets:
Properties:
error_reset_level = max
error_reset_verbosity = normal
hw_change_level = max
hw_change_verbosity = normal
level = max
mode = normal
power_on_level = max
power_on_verbosity = normal
trigger = hw-change error-reset
verbosity = normal
Commands:
cd
set
show
for a list of
Advertisement
Table of Contents
Need help?
Do you have a question about the Netra SPARC T4-1B and is the answer not in the manual?
Questions and answers