Service-Related Oracle Ilom Commands - Oracle Netra SPARC T4-1B Service Manual

"Check for Faults (show faulty Command)" on page 18
■
"Check for Faults (fmadm faulty Command)" on page 20
■
"Service-Related Oracle ILOM Commands" on page 22
■

Service-Related Oracle ILOM Commands

These are the Oracle ILOM shell commands most frequently used when performing
service-related tasks.
Oracle ILOM Command
help [command]
set /HOST send_break_action=break
set /SYS/component clear_fault_action=true
start /HOST/console
show /HOST/console/history
set /HOST/bootmode property=value
stop /SYS
start /SYS
stop /SYS
start /SYS
reset /SYS
reset /SP
set /SYS keyswitch_state=value
set /SYS/LOCATE value=value
show faulty
show /SYS keyswitch_state
22 Netra SPARC T4-1B Server Module Service Manual • June 2012
Description
Displays a list of all available commands with syntax
and descriptions. Specifying a command name as an
option displays help for that command.
Takes the host server module from the OS to either
kmdb or OBP (equivalent to a Stop-A), depending on
the mode Oracle Solaris software was booted.
Manually clears host-detected faults. The component is
the unique ID of the device with a fault to be cleared.
Connects to the host.
Displays the contents of the host's console buffer.
Controls the host server module OBP firmware
method of booting. property is state, config, or
script
Powers off the host server module and then powers on
the host server module.
Powers off the host server module.
Powers on the host server module.
Generates a hardware reset on the host server module.
Reboots the SP.
Sets the virtual keyswitch. value is normal, standby,
diag, or locked.
Turns the Locator LED on the server module on or off.
value is Fast_blink or Off.
Displays current server module faults. See
Faults (show faulty Command)" on page
Displays the status of the virtual keyswitch.
"Check for
18.