Servicing The Fem; Remove A Fem - Oracle Netra SPARC T4-1B Service Manual

Servicing the FEM

The server module supports the installation of one FEM. To see a list of supported
FEMs for this server module, refer to the Netra SPARC T4-1B Server Module Product
Notes.
Description
Replace a FEM.
Install a FEM.
Related Information
"Detecting and Managing Faults" on page 5
■
"Preparing for Service" on page 51
■

▼ Remove a FEM

FEMs are available in single and double widths. Figures in this procedure depict a
single-width FEM, but the procedure applies to both types of FEMs.
1. Prepare for service.
See "Preparing for Service" on page
2. Lift the lever to eject the FEM (panel 1).
Links
"Remove a FEM" on page 93
"Install a FEM" on page 94
"Install a FEM" on page 94
51.
93