Installation Of The Top Cover; Installation Of The - Barco CLM R10+ R90501001 User Manual

17. Projector covers, removal and installation
Image 17-11
Fixate side cover

17.7 Installation of the top cover

How to install
1. Place the top cover on the projector and push on the front side and back side of the cover until it clicks into its locks (4 locks).
(image 17-12)
2. Secure the cover by turning the captive screw clockwise.
Image 17-12
Mount top cover
17.8 Installation of the back cover
How to install
1. Hook the back cover on the top and side covers so that the edges of all three covers are fixed in the back cover. No open space
allowed between two covers. (image 17-13)
2. Secure this position by turning the 3 captive screw clockwise. (image 17-14)
Image 17-13
Mount back cover
186 R59770021 CLM R10+ 11/10/2010