Decode Setting (1664 Only); Aiming Pattern; Decoding Illumination; Illumination Brightness - CipherLab 1662 User Manual

1.17 2D DECODE SETTING (1664 ONLY)

1.17.1 AIMING PATTERN

Enable/Disable the aiming pattern during scanning.

1.17.2 DECODING ILLUMINATION

Enable/Disable illumination during scanning.
Enabling illumination usually results in superior images. The effectiveness of the
illumination decreases as the distance to the target increases.

1.17.3 ILLUMINATION BRIGHTNESS

Specify the illumination brightness level ranging from 1 to 10 for the 2D reader. The
default value is 10 which represents 100% illumination brightness.
1) Read the barcode above to configure the illumination brightness.
2) Read the "Decimal
3) Read the "Validate" barcode to complete this setting.
Value" barcode on page 261 for the desired setting value.
Chapter 1 Understanding the Barcode Scanner
*Enable
Disable
*Enable
Disable
Set Illumination
Brightness Level for
2D Reader 1~10 (*10)
Update
51