Use Bluetooth ® Dongle - CipherLab 1662 User Manual

1662/1664 Barcode Scanner
5) After upgrading kernel, you will need to restart the scanner manually.
After upgrading the user program, the scanner will restart itself automatically once
the download is completely.
Note: Because 1662/1664 supports the downloading of firmware via Direct USB Virtual
COM interface, the output interface will be set to the previously used one upon
completion of firmware upgrade.
USE BLUETOOTH DONGLE
®
1) Refer to 3.2.3 Connect to Dongle
request from your computer.
2) Read the following barcodes in sequence to configure the scanner to use Bluetooth
SPP as download interface.
244
User Guide
for the target scanner to accept the connection
Enter Setup
Activate Bluetooth
For the communication
"RS-232" and the correct COM port for
Direct USB Virtual COM interface.
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
®
SPP
Update
Enter Setup
settings, select
®