Example - CipherLab 1662 User Manual

EXAMPLE

KEY TYPE = NORMAL
For example, if you want to program the character "!" as the prefix code:
1) Read the "Configure Prefix" barcode.
2) Read the "Hexadecimal
3) Read the "Validate" barcode to complete this setting.
KEY TYPE = SCAN CODE
For example, if you want to program the character "a" (= "1C" on the scan code table) as the
prefix code:
1) Read the "Configure Prefix" barcode.
2) Read the "Scan Code" barcode.
3) Read the "Hexadecimal
4) Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
For example, if you want to program the character "!" (= "Shift" + "1" on keyboard) as the prefix
code:
1) Read the "Configure Prefix" barcode.
2) Read the "Add Shift" barcode.
3) Read the "Hexadecimal
4) Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = CTRL
For example, if you want to program "Ctrl+A" and "Ctrl+$" as the prefix code:
1) Read the "Configure Prefix" barcode.
2) Read the "Add Left Ctrl" barcode.
3) Read the "Hexadecimal
4) Read the "Add Left Ctrl" barcode.
5) Read the "Hexadecimal
6) Read the "Validate" barcode to complete this setting.
Value" barcode on page 262 for "2" and "1".
Value" barcode on page 262 for "1" and "C".
Value" barcode on page 262 for "3" and "1".
Value" barcode on page 262 for "4", "1" (= "A").
Value" barcode on page 262 for "2", "4" (= "$").
Appendix III Keyboard Wedge Table
Update
259