CipherLab 1662 User Manual page 261

3) Read the following barcodes in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
4) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K1664_V*.shx
5) After upgrading kernel, you will need to manually restart the scanner.
After upgrading the user program, the scanner will automatically restart itself once
the download is completed successfully.
Note: The output interface remains unchanged as specified in step 2 (=Bluetooth
Enter Setup
User Program
STD1664_V*.shx
Appendix I
Download
For the communication
"RS-232" and the correct COM port for
®
Bluetooth SPP interface.
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
Update
Firmware Upgrade
settings, select
®
SPP).
245