Hid Character Transmit Mode; Special Keyboard Feature; Keypad Support For Iphone/Ipad - CipherLab 1662 User Manual

2.1.6 HID CHARACTER TRANSMIT MODE

By default, HID interface sends data to the host in batch. You may read the "By
Character" barcode to process data one character at a time.
Note: "By Character" transmit mode is required when working with iPhone or iPad.

2.1.7 SPECIAL KEYBOARD FEATURE

By default, the special keyboard feature is based on the factory definition. You can decide
whether to apply the special keyboard feature. Refer to

2.1.8 KEYPAD SUPPORT FOR IPHONE/IPAD

When the scanner has been successfully connected to iPhone or iPad for data collection,
the onscreen keypad of iPhone or iPad will disappear. Read the "Use POWER Key to Show
or Hide Keypad" barcode in advance. Then, it will allow pressing the [Power/Delete] key
to show or hide the onscreen keypad.
Chapter 2
*Batch Processing
By Character
Keyboard Wedge
*Apply
Bypass
*Normal
Use POWER Key to
Show or Hide Keypad
Update
Selecting Output Interface
Table.
67