4.11.3 GS1 FORMATTING
Decide whether to enable GS1 formatting for GS1-128. When enabled, code ID
transmitting will be disabled; however, the field separator and application ID mark
characters will be automatically added to the output data.
You may want to add an application ID mark (1 character long) to the left (AIMark1) or
right (AIMark2) of an application ID (AI) for the purpose of labeling it when formatting
the GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the
"Hexadecimal
'00' if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
Value" barcode on page 262 for the desired character. Read
Chapter 4
Change Symbology Settings
Enable
*Disable
AIMark1
AIMark2
Update
137