Application Id Mark - CipherLab 1662 User Manual

4.13.7 APPLICATION ID MARK

You may want to add an application ID mark (1 character long) to the left (AIMark1) or
right (AIMark2) of an application ID (AI) for the purpose of labeling it when formatting
the GS1 data. The application ID mark is automatically added to the data when GS1
formatting is enabled.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the "Hexadecimal
'00' if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
System" barcode on page 262 for the desired character. Read
Chapter 4 Change Symbology Settings
AIMark1
AIMark2
Update
145