Convert To Upc/Ean; Field Separator (Gs Character) - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

4.13.5 CONVERT TO UPC/EAN

This only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited barcodes not
decoded as part of a Composite barcode.
Convert to EAN-13: It will strip the leading "010" from barcodes.
"01" is the Application ID and must be followed by a single zero (the first digit
encoded).
Convert to UPC-A: It will strip the leading "0100" from barcodes.
"01" is the Application ID and must be followed by two or more zeros (but not six
zeros).

4.13.6 FIELD SEPARATOR (GS CHARACTER)

Decide whether to apply a field separator (to convert the GS control character to human
readable character). The field separator is automatically added to the data when GS1
formatting is enabled.
1) Read the barcode above to specify field separator.
2) Read the "Hexadecimal
3) Read the "Validate" barcode to complete this setting.
144
User Guide
Convert to UPC/EAN
Value" barcode on page 262 for the desired character string.
*Disable
*Do Not Convert
Specify Field
Separator...
Enter Setup