CipherLab 1662 User Manual page 220

1662/1664 Barcode Scanner
5A (Z) N/A
5B ( [ ) GS1 DataBar (RSS)
3) Barcode Length setting – read the
4-digit length of the (first) barcode. For example, read "0065" for barcode length of
65 characters or read "0000" for any length.
Note: If not reading 0000 for any length, the 4-digit length must exclude prefix, suffix
(0x0d by default), length code, etc.
4) Matching Character setting – read the
st
the 1 character that must be found matching in the (first) barcode. For example,
read "4" and "1" for matching character "A" as the first character in the barcode or
read "00" for any character.
5) Read twice the "F" barcode on page 262 ("FF") to complete the setting of each
barcode.
6) Read the "Validate" barcode to end the editing of the barcode set.
204
User Guide
"Decimal
"Hexadecimal
79 (y) Chinese 25
7A (z) Aztec
7B ({) Micro QR
7C (|) USPS 4CB / One Code /
Intelligent Mail
7D (}) UPU FICS Postal
7E (~) UCC Coupon Extended Code
Value" barcode on page 261 for the
Value" barcode on page 262 for
Enter Setup