Release Notes - CipherLab 1662 User Manual

RELEASE NOTES

Version Date
2.18 Nov. 05, 2014
2.17 May 09, 2014
2.16 Mar. 06, 2014
2.15 Jul. 19, 2013
2.14 Jun. 10, 2013
Notes
New: 1.2.4 Record Count of Memory added
Modified: 1.11 – range of Security Level (2~30 times)
Modified: Appendix II – "#@RDBATCAP" serial command added
New: 1.20 – Serial Number Stamp
New: 1.20.1 – Separator between Serial Number and Data
New: 2.1.10 – BT HID Slave/Master Switching
New: 2.1.11 – BT HID Auto-Reconnection
New: 2.5.2 – Activate USB Virtual COM_CDC
New: 2.6.7 – USB Polling Interval
Modified: 3.2.2 – length of device name changed to 13 bytes (max.)
New: 4.11.3 – GS1 Formatting, Application ID Mark
Modified: 4.13.2 – add GS1 formatting (Omnidirectional) barcodes
Modified: 4.13.3 – add GS1 formatting (Expanded) barcodes
Modified: 4.13.4 – add GS1 formatting (Limited) barcodes
New: 4.13.6 – Field Separator
New: 4.13.7 – Application ID Mark
New: 4.21.1 – add GS1 formatting (Composite CC-A/B) barcodes
New: 4.21.2 – add GS1 formatting (Composite CC-C) barcodes
New: 4.21.6 – Field Separator
New: 4.21.7 – Application ID Mark
Modified: Appendix I – Notes for upgrading 3610 CPU/Bridge
firmware added
Modified: Care & Maintenance – "Keep the scanner away from any
magnets and magnetic fields to prevent the laser engine from
malfunctioning." added
Modified: 1.1.2 - Enable/Disable the [Delete] key barcodes added
Modified: 1.17.3 – Illumination Brightness setup barcode added
Modified: 3.2.2 – Changing Device Name barcode added
Modified: Appendix II – #$ShowScanner, #$SelectScannerN,
#@BEEP,xx, #@RLED,xx, #@GLED,xx, #@VIBR,xx added
Modified: Appendix III – remove "Send" from "CR*/Send/ENTER*"
Added: 1.18.3 Disable Hardware Reset (setting barcodes)
Added: 1.19 Mobile Phone/Display Mode
Added: 2.1.9 Transmit Speed
Added: 3.2.4 Secure Simple Pairing (2.1.9 Simple Pairing for
iPhone/iPad removed)
Added: 4.15.1 EAN-8 – Check Digit function barcode added
Added: 4.16.3 EAN-13 – Check Digit function barcode added