Removal Of Special Character; Aim Code Id - CipherLab 1662 User Manual

1662/1664 Barcode Scanner User Guide

5.7 REMOVAL OF SPECIAL CHARACTER

You can only specify 1 character, but it will remove every matching character
encountered from the starting position of barcode data until a different character is met.
For example, if it is configured to remove the character "0" (hex value is "30"), one or
more zeros will be stripped off the barcode data "012345" and "00012345". However, for
barcode data "010333", only the first zero will be stripped off.
Remove Special
Character
1) Read the barcode above to remove the specified character.
2) Read the "Hexadecimal Value" barcode on page 262 for the desired character string.
For example, read "3" and "0" for the scanner to remove the character "0".
3) Read the "Validate" barcode to complete this setting.

5.8 AIM CODE ID

You can add an AIM (Automatic Identification and Mobility) code ID in front of the
barcode that share the common purpose of identifying, tracking, recording, storing and
communicating essential business, personal or product data. Enabling this function can
have the scanner be capable of fast and accurate data collection and search.
Enable
*Disable
206
Enter Setup