Continuous Mode (1662 Only); Alternate Mode (1662 Only) - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

1.7.6 CONTINUOUS MODE (1662 ONLY)

The scanner is always scanning.
After a successful decoding, the removal of barcode is required. It is not allowed to
proceed to decode until the decoding delay time has passed.
To decode the same barcode repeatedly, move away the barcode and put it back
again and again for scanning.
Note: Refer to "Delay between Re-read".
Decoding Delay
Set the time interval between each decoding.

1.7.7 ALTERNATE MODE (1662 ONLY)

The scanner will start scanning once the trigger is pressed
The scanning won't stop until you press the trigger again.
40
User Guide
Continuous Mode
*Disable
0.5 sec
1 sec
2 sec
Alternate Mode
Enter Setup