CipherLab 1662 User Manual page 268

1662/1664 Barcode Scanner
#@////<CR>
For the scanner to save the settings, send the serial command "#@109999" –
#@101011<CR>
#@109999<CR>
For the scanner to read the serial number and beep -
#@RDSN<CR>
#@////<CR>
For the scanner to beep for nine times -
#@BEEP,09<CR>
For the scanner's LED indicator to blink in red for nine times -
#@RLED,09<CR>
For the scanner's LED indicator to blink in green for nine times -
#@GLED,09<CR>
For the scanner to shake for nine times -
#@VIBR,09<CR>
Get the battery capacity information -
#@RDBATCAP<CR>
Note: (1) For USB Virtual COM, only configure the first scanner that connects to 3610.
To identify the scanner, send the serial command to have it respond with a beep.
(2) For Bluetooth
252
User Guide
®
SPP, allows configuring up to seven scanners at the same time.
Enter Setup