CipherLab 1662 User Manual page 258

1662/1664 Barcode Scanner
5) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K1664_V*.shx
6) After upgrading kernel, you will need to manually restart the scanner.
After upgrading the user program, the scanner will automatically restart itself once
the download is completed successfully.
Note: The output interface remains unchanged as specified in step 3 (= USB Virtual
COM).
242
User Guide
Enter Setup
Download
User Program
STD1664_V*.shx
For the communication
"RS-232" and the correct COM port for USB
Virtual COM interface.
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
Enter Setup
settings, select