Picklist Mode (1664 Only); Pager Beep Duration; Picklist Mode - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

1.14 PICKLIST MODE (1664 ONLY)

Picklist mode enables the decoder to decode only the barcodes aligned under the center
of the laser aiming pattern.

1.15 PAGER BEEP DURATION

Paging function is only activated when 1662/1664 is in Power-Saving mode. 1662/1664
can be woken up via receiving any Bluetooth
host keyboard. The buzzer will continuously sound two short high tone beeps until the
power key is pressed on the scanner or the timeout is reached, and the scanner
re-enters power saving mode.
By default, the pager beep duration is 5 seconds. Specify a value, ranging from 0 to 15.
(0~15 sec.; 0= Disable)
®
Bluetooth HID profile: Press any one of the following keys "Scroll Lock", "Number
Lock" or "Caps Lock" on the host computer to trigger the waking up of 1662/1664.
®
Bluetooth SPP Profile: Any command sent using Bluetooth
waking up of 1662/1664.
1) Read the barcode above to specify the desired beep active time.
2) Read the "Decimal
pager beep function to be activated each 15 seconds after entering Power-Saving
mode.
3) Read the "Validate" barcode on the same page to complete this setting.
46
User Guide
Value" barcode on page 261. For example, read "1" and "5" for the
Enable
*Disable
®
status command by pressing a key on the

Pager Beep Duration

0~15 sec.
(*5 s)
Enter Setup
®
SPP will trigger the