Use Direct Usb Cable; Direct Usb Interface; Disable Direct Usb Interface - CipherLab 1662 User Manual

1.13 USE DIRECT USB CABLE

1662/1664 supports Direct USB interface for charging the battery and/or sending data to
the host in memory mode. Refer to
Note: The scanner will not function when it is solely on USB power and without a battery
loaded.

1.13.1 DIRECT USB INTERFACE

When it is set to Memory Mode and connected to computer via the Direct USB cable, the
default output interface becomes "Direct USB Virtual COM", change it to "Direct USB
HID" if required.
For details on configuring the interface settings, refer to the following sections:
2.6 Direct USB HID
2.7 Direct USB Virtual COM

1.13.2 DISABLE DIRECT USB INTERFACE

When connecting the USB cable to the scanner for charging the battery, ensure the
"Disable Direct USB" barcode has been scanned to avoid sending data to the host in
memory mode. In this mode the USB cable function will be charging the battery only.
Chapter 1
1.2.2 Memory Mode.
*Activate Direct
USB Virtual COM
Activate Direct
USB HID
Disable Direct USB
Understanding the Barcode Scanner
Update
45