Inter-Function Delay - CipherLab 1662 User Manual

Chapter 2 Selecting Output Interface
2D One-Scan Setup Barcode for connecting with a target device

2.3.2 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of milliseconds, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
Inter-Function
Delay... (*0~254)
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal Value" barcode on page 261 for the desired inter-function delay (in
milliseconds).
3) Read the "Validate" barcode on the same page to complete this setting.
73
Update