Defining Output Format; Letter Case - CipherLab 1662 User Manual

DEFINING OUTPUT FORMAT

You may configure the format of the collected data output to the host computer.
Barcodes read by the scanner will be processed in the following sequence -
1) Perform character substitution on the data scanned.
2) Add Code ID and
3) Process the whole data in step 2 with user formats. Data is now divided into fields by
user specified rules. Refer to
4) Add Prefix Code
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case ..............................................................173
5.2 Character Substitution ...............................................174
5.3 Prefix/Suffix Code .....................................................186
5.4 Code ID...................................................................187
5.5 Length Code ............................................................194
5.6 Multi-Barcode Editor..................................................202
5.7 Removal of Special Character .....................................206
5.8 AIM Code ID ............................................................206

5.1 LETTER CASE

By default, the alphabetics transmission is case-sensitive, meaning that the alphabet will
be transmitted according to their original case. Ignoring the original letter case, select
[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output
data in lower case only.
Length Code to the front of the data:
Chapter 6 Applying Formats for Data
and Suffix Code
[Code ID][Length Code][Data]
before transmission:
*Normal
Upper Case
Lower Case
Update
Chapter 5
Editing.
[Prefix Code][Processed
173