LIST THE CURRENT SETTINGS
The current settings of all scanner parameters can be sent to the host computer for user
inspection. The listing includes pages as shown below. You can select the page of interest
by having the scanner read the "List Page x" barcode. The scanner will respond with two
beeps (low-high tone) and send the selected page to the host immediately.
List settings regarding Firmware Version, Serial
Number,
Interface,
Status and Other Scanner Parameters
List settings regarding Prefix, Suffix, Code Type
and Length Code Setting (1/2)
List settings regarding Prefix, Suffix, and Length
Code Setting (2/2)
List settings regarding Code ID
List settings regarding Readable Symbologies
(1/2)
List settings regarding Readable Symbologies
(2/2)
List settings regarding Symbology Parameters
(1/3)
List settings regarding Symbology Parameters
(2/3)
List settings regarding Symbology Parameters
(3/3)
Reserved
Buzzer,
Simple
Pairing
List Page 1
List Page 2
List Page 3
List Page 4
List Page 5
List Page 6
List Page 7
List Page 8
List Page 9
List Page 10
Update
Quick Start
17