Create One-Scan Setup Barcodes; One-Scan Barcode - CipherLab 1662 User Manual

CREATE ONE-SCAN SETUP BARCODES

The fact is most of the scanner parameters require only one read for setting new values.
To facilitate configuring the scanner, you may create One-Scan setup barcodes for use.
1D ONE-SCAN BARCODE
The requirements of a 1D One-Scan setup barcode are:
a prefix of the "#@" characters
the six digits of command parameters
a suffix of the "#"character
For example, the scanner needs the reading of three setup barcodes for the command
parameter "109952" to take effect:
Now, it requires only one read:
Note: The scanner will restart automatically upon reading the One-Scan setup barcode
for (1) changing the interface or (2) setting memory mode, enable or disable. It
will respond with a long beep and its LED will come on-off.
Enter Setup
One-Scan Setup Barcode for
109952
List Page 3
Update
Update
Quick Start
19