Character Substitution - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

5.2 CHARACTER SUBSTITUTION

Character substitution is performed on every occurrence of the first character specified. If
only one character is specified, every occurrence of that character in the barcode will be
taken away.
The first character will be replaced by the second character(s).
Up to three sets of character substitution can be configured.
®
If "Bluetooth HID" or "USB HID" is configured for interface,
will then become applicable. You may decide whether or not to apply Key Status
when "Normal Key" is selected for Key Type.
Key Type
Scan Code Only 1 scan code value is allowed.
Refer
Character Substituion.
Normal Key Up to 3 character strings are allowed.
Note: The character substitution is performed only on the barcode itself and before the
processing of editing formats. It is not applicable to the Prefix/Suffix Code, Code
ID, Length Code, or any Additional Field.
174
User Guide
to 5.2.1 Select a
Key Status
N/A
Set for
Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Refer to Keyboard Wedge Table.
Key Type and Key Status
Enter Setup