CipherLab 1662 User Manual page 124

1662/1664 Barcode Scanner
Use random PIN
No PIN required
Note: When using Bluetooth
code for authentication. In this case, make sure you have the scanner set to "No
PIN or use random PIN" before pairing. While pairing, the host PIN code will be
displayed on the computer screen. Have the scanner read the setup barcode
"Enter PIN Code in Decimal" or "Enter PIN Code in Hexadecimal" to input the
matching PIN code. Refer to
108
User Guide
®
HID, some device driver may not support pre-defined PIN
Disable Authentication or Use Random PIN.
Enter Setup